Crossfire V6-32L VIN L (2004) | Interior Moulding / Trim | Carpet Service & Repair
8. Remove the kick panel (2) in the right footwell. Pull the edge guard (1) off in the area of the kick panel (2). Remove the cap (3) with a suitable
tool, then remove the screw.
9. Unhook the storage pocket and remove it from the vehicle.
10. Disconnect the connector from the parking brake switch (1).
11. Remove the plugs and pull off the edge protector at the rear in the lower area.
CAUTION: Do not damage electrical and pneumatic lines.
12. Cut the carpet (1) in the transmission tunnel area along the dotted lines with a sharp knife.
CAUTION: Do not damage electrical and pneumatic lines.
