chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Keyless Entry - Transmitters Inoperative|Page 4807 > < Keyless Entry - Transmitters Inoperative|Page 4805
Page 1
background image

Keyless Entry Transmitter: Specifications

TRANSMITTER

BATTERY TESTING

The batteries in the Remote Keyless Entry transmitter can be tested by pressing and holding both the lock and unlock buttons simultaneously for more
than one second. The batteries are charged sufficiently if the LED next to the ignition key blade lights up briefly.

BATTERY REPLACEMENT

The transmitter has two 3 volt batteries, which can be removed and replaced without special tools. First, release the key from the closed position; then
insert a coin in the side slot of the transmitter and twist. The cover should separate from the body of the transmitter where the batteries are stacked on top
of each other. The batteries are available at local retail stores. Recommended replacement batteries are Panasonic(R) CR 2025 lithium or equivalent.
Battery life for normal use is about two years.

NOTE:  The transmitter MUST be reprogrammed after the batteries are replaced.

RANGE

Operation range is within 20 meters (66 feet) of the module/receiver.

Keyless Entry - Transmitters Inoperative|Page 4807 > < Keyless Entry - Transmitters Inoperative|Page 4805