Crossfire V6-3.2L VIN L (2004)
1. Install the rear bow cylinder (2) into the top frame and install the retainers (1 and 3) (right side shown, left side similar).
2. Connect the travel sensors to the cylinder (4) (left side only).
3. Connect the hydraulic lines to the cylinder using new O-rings and retainers.
4. Install the cover side retainers to the top frame by sliding the retainer into the frame and pushing up to lock into place (left side shown, right side
similar).
5. Install new retaining rivet (1) (left side shown, right side similar).