Crossfire V6-3.2L VIN L (2004)
3. Install the top catch cover (2) to the front bow (3). Tighten screws (1) to 5 N.m (44 in.lbs.).
4. Raise the convertible top.
INSTALLATION - LATCH RETAINER
1. Install the latch retainer (2), shim (3), and retaining screws (4). Tighten screws to 10 N.m (89 in.lbs.).
2. Connect the latch retainer switch harness connector (5).
3. Install the upper windshield trim panel.
4. Connect the universal transmitter harness connector and install the lower windshield trim panel.
5. Install the dome lamp assembly.
6. Install the right and left sun visors.
7. Install both A-pillar trim panels.
8. Raise the convertible top.