Crossfire V6-3.2L VIN L (2004)
2. Install the brake lines (1 - 6). Pay very close attention to the locations when installing the hydraulic lines. DO NOT cross thread.
^
Right rear wheel (1)
^
Master cylinder front (2)
^
Right front wheel (3)
^
Left front wheel (4)
^
Left rear wheel (5)
^
Master cylinder rear (6)
3. Connect the hydraulic controller unit harness connector (1) to the CAB.
4. Bleed the brake system.
5. Connect the DRBIII and read any DTCs, then clear any applicable codes.