Crossfire V6-3.2L VIN L (2004)
All involved vehicle owners known to DaimlerChrysler are being notified of the service requirement by mail. They are requested to schedule
appointments for this service with their dealers. A generic copy of the owner letter is included.
Enclosed with each owner letter is an Owner Notification postcard to allow owners to update our records if applicable.
Dealers are encouraged to consider alternative scheduling and servicing approaches for this notification. This repair does not require hoists or other full
service facility special equipment and is a DaimlerChrysler Mobile Service approved repair.
Vehicle Lists, Global Recall Module, VIP and Dealer Follow Up
All involved vehicles have been entered into the DealerCONNECT Global Recall Module (GRS) and Vehicle Information Plus (VIP) for dealer inquiry
as needed.
GRS provides involved dealers with an updated VIN list of their incomplete vehicles. The owner's name, address and phone number are listed if known.
Completed vehicles are removed from GRS within several days of repair claim submission.
To use this module, click on the "Service" tab and then click on "Global Recall Module." Your dealer's VIN list for each recall displayed can be sorted
by: those vehicles that were unsold at recall launch, those with a phone number, city, zip code, or VIN sequence.
Dealers should perform this repair on all unsold vehicles before retail delivery. Dealers should also use the VIN list to follow up with all owners to
schedule appointments for this repair.
VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of various
states. Use of this information is permitted for this notification only and is strictly prohibited from all other use.
Additional Information
If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.
Customer Services Field Operations
DaimlerChrysler Corporation
Service Procedure
1.
Disconnect the negative battery cable.
2.
Disconnect the radiator fan harness electrical connector.
3.
Remove the upper coolant hose from the holding bracket.
4.
Remove the two radiator cooling fan module hold-down clamps (Figure 1)
5.
Carefully move the upper and lower radiator hoses away.
