Crossfire V6-3.2L VIN L (2004)
Main Bearing Cap Torque Sequence
7. Follow the torque sequence shown for the crankshaft main bearing journal cap bolts.
8. Main bearing journal caps must be tightened in two stages.
^
Stage one for me bolts, 20 Nm (15 ft. lbs.).
^
Stage two for me bolts, rotate 90° clockwise.
^
Stage one for m10 bolts, 30 Nm (22 ft. lbs.).
^
Stage two for m10 bolts, rotate 90° clockwise.
CAUTION: Connecting rod bolts exceeding 47.6 mm in length must be replaced.
9. Install the connecting rod caps and the bolts to the connecting rod as marked.
10. Install the oil pump.
11. Install the upper oil pan.
12. Install the timing chain.
13. Install a new crankshaft rear radial seal.
