Crossfire V6-3.2L VIN L (2004)
Evaporator Core: Description and Operation
The evaporator coil is located in the HVAC housing, under the instrument panel. The evaporator coil is positioned in the HVAC housing so that all air
that enters the housing must pass over the fins of the evaporator before it is distributed through the system ducts and outlets. However, air passing over
the evaporator coil fins will only be conditioned when the compressor is engaged and circulating refrigerant through the evaporator coil tubes.
Refrigerant enters the evaporator from the orifice tube as a low-temperature, low-pressure liquid. As air flows over the fins of the evaporator, the
humidity in the air condenses on the fins, and the heat from the air is absorbed by the refrigerant. Heat absorption causes the refrigerant to boil and
vaporize. The refrigerant becomes a low-pressure gas before it leaves the evaporator.
The evaporator coil cannot be repaired and, if faulty or damaged, it must be replaced.
