Crossfire V6-3.2L VIN L (2004)
Glove Box Lamp: Service and Repair
Glove Box Lamp/Switch Replacement
WARNING. REFER TO RESTRAINTS BEFORE ATTEMPTING ANY DOOR, SEAT, STEERING WHEEL, STEERING COLUMN, OR
INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD
RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
REMOVAL
1. Disconnect the negative battery cable.
2. Open the glove box door and depress the lens retaining clips with a trim stick (1). Gently pry the glove box lamp/ switch (2) from the glove box
liner (3).
3. Disconnect the glove box lamp/switch harness connector and remove the glove box lamp/switch (2) from the vehicle.
INSTALLATION
1. Connect the glove box lamp/switch harness connector (1).
2. Insert the glove box lamp/switch (2) into the opening in the glove box liner and close the glove box door.
3. Connect the negative battery cable.
