Crossfire V6-3.2L VIN L (2004)
Glove Box Lamp Switch: Description and Operation
The glove box lamp/switch (1) is a self-contained set of switches, lamp, and housing assembly that provides illumination into the glove box compartment
whenever the glove box door is opened. It is located behind the glove box door at the top of the liner, just to the left of the latch striker.
The glove box lamp/switch contains two separate switches; one for control of the illumination, and the other to sense the glove box door position. Power
is supplied through fuse 31 in the Underhood Accessory Fuse Block for the lamp illumination switch. The central locking pump/security system module
receives a ground signal from the second switch when the glove box is opened. Neither of these switches can be adjusted or repaired. If faulty, worn, or
damaged, the entire glove box lamp/switch assembly must be replaced. For complete glove box lamp/switch removal procedures, see glove box
lamp/switch removal.
