Crossfire V6-3.2L VIN L (2004)
Marker Lamp: Service and Repair
Rear Marker Lamp Replacement
REMOVAL
1. Disconnect the negative battery cable.
2. Insert a trim stick (2) at the front edge of the rear marker lamp lens (1), gently depress rearward and lift out from the fascia.
3. Rotate the socket counterclockwise and remove the rear marker lamp bulb from the socket.
INSTALLATION
1. Insert the rear marker bulb into the socket (1) and rotate clockwise into the rear marker lamp lens (2).
2. Install the back edge of the rear marker lamp lens first into the fascia (3), then press the forward edge in at the front.
3. Connect the negative battery cable.
