Crossfire V6-3.2L VIN L (2004)
Tail Lamp: Service and Repair
Tail/Stop
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the access panel from the cargo area interior trim panel.
3. Rotate the tail/stop lamp socket (2) counterclockwise and pull it from the tail lamp unit (1).
4. Remove the bulb from tail/stop lamp socket (2).
INSTALLATION
1. Install the bulb (2) into the tail/stop lamp socket (1).
2. Insert the tail/stop lamp socket (1) into the tail lamp unit (3) and rotate clockwise to lock.
3. Install the access panel into the cargo area interior trim panel.
4. Connect the negative battery cable.