Crossfire V6-3.2L VIN L (2004)
Spark Plug: Service and Repair
REMOVAL
1. Pull and turn the metal clad spark plug cable boots (2) to remove them from the spark plugs.
NOTE: Avoid allowing debris to fall into the spark holes during replacement.
2. Clean the cylinder head spark plug recesses (2) using low pressure compressed air.
CAUTION: Do not use power tools to replace spark plugs. Damage to the cylinder head can result.
3. Use a rubber insulated spark plug socket and a hand ratchet to remove the spark plugs (1).
INSTALLATION
1. Using a gap gauge (1), gap the spark plugs to 1.00 mm (0.039 in.) before installing them.
