chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Engine Controls - MIL ON/Multiple Misfire DTCs Set|Page 2603 > < Engine Controls - Flash Programming Failure Recovery|Page 2598
Page 1
background image

Technical Service Bulletin # 18-030-04

Date: 040705

Engine Controls - MIL ON/Multiple Misfire DTCs Set

NUMBER: 18-030-04

GROUP: Vehicle Performance

DATE: July 5, 2004

THE DRBIII(R) FLASH FILES FOR THIS BULLETIN ARE AVAILABLE ON DealerCONNECT.

FOR MARKETS OUTSIDE OF THE UNITED STATES AND CANADA, THE FLASH FILES AND REPROGRAMMING INSTRUCTIONS WILL
BE AVAILABLE ON ITIL/ISIS DVD AUGUST, 2004.

SUBJECT:
Flash: MIL Illumination with Diagnostic Trouble Codes P0300 P0301 P0302 P0303 P0304 P0305 P0306

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2004

(ZH)

Crossfire

NOTE:

This bulletin applies to vehicles built on or before December 13, 2003 (MDH1213XX).

SYMPTOM/CONDITION:

The vehicle operator may experience a MIL illumination. Further diagnosis may determine that the MIL was caused by one or more of the following
Diagnostic Trouble Codes (DTC's):

P0300 - MULTIPLE CYLINDER MISFIRE
P0301 - CYLINDER # 1 MISFIRE
P0302 - CYLINDER # 2 MISFIRE
P0303 - CYLINDER # 3 MISFIRE
P0304 - CYLINDER # 4 MISFIRE
P0305 - CYLINDER # 5 MISFIRE
P0306 - CYLINDER # 6 MISFIRE

DIAGNOSIS:

Using a Scan Tool (DRBIII(R)) with the appropriate diagnostic procedures on TechCONNECT, verify all engine systems are functioning as designed. If
DTCs are present, other than those listed above, record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the customer describes the Symptom/Condition and the DTCs listed are present, perform the Repair Procedure.

PARTS REQUIRED:

Engine Controls - MIL ON/Multiple Misfire DTCs Set|Page 2603 > < Engine Controls - Flash Programming Failure Recovery|Page 2598