Crossfire V6-3.2L VIN L (2004)
11. Remove the bolt (1) attaching the SET to the vehicle.
12. Remove the SET.
INSPECTION
1. Check the Seat Belt Tensioner (SET) with the DRBIII(R).
2. Read and record all DTCs.
3. Inspect for the following:
1. If the first ignition Squib has been fired electrically and the red pin (1) is visible, all three ignition Squibs have been fired.
2. If the first ignition Squib has been fired electrically and the red pin (1) is not visible, not all three ignition Squibs have been fired.
INSTALLATION
1. Position the SET in the vehicle.