Crossfire V6-3.2L VIN L (2004)
5. Replace the carpet (1) in the upper corner area.
6. Position the plastic cover (3) over the seat belt.
7. Install the screws (1) attaching the plastic cover (3) to the door opening.
8. Install the door edge guard (2).
9. Install the bolt (1) on the belt end attaching it to the seat. Tighten to 35 Nm (26 ft. lbs.).
10. Install the ignition key to the vehicle.
11. Do not reconnect the battery negative cable at this time. The supplemental restraint system verification test procedure should be performed
