chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Fluid Line/Hose, A/T > < Fluid Filter - A/T|Description and Operation|Page 2706

Crossfire V6-3.2L VIN L (2004)

Page 2
background image

12. Install the heat shield and the bolts (2). Tighten the bolts to 8 Nm (71 inch lbs.).
13. Route the oxygen sensor wire harness (1) in the heat shield. Connect the oxygen sensor wire harness connectors.
14. Lower the vehicle.
15. Fill the transmission with the specified fluid.

Fluid Line/Hose, A/T > < Fluid Filter - A/T|Description and Operation|Page 2706