Crossfire V6-3.2L VIN L (2004)
SPECIAL TOOLS/EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
1.
Replace the first gear synchro kit (p/n 05137639AA), input shaft seal (p/n 05099840AA), and the countershaft retaining bolt access plug (p/n
05096861AA. Refer to the service information available in TechCONNECT or the 2004 Crossfire service manual (publication no. 81-270-04036),
page 21-368.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
