chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - Wiper and Washer Systems > < Wiper Control Module|Description and Operation|Page 5695

Crossfire V6-3.2L VIN L (2004)

Page 4
background image

7. Connect the wiper motor harness connector (2) to the Body Control Module (BCM) (3) and slide the locking tab fully over the connector (2).
8. Install the control module box cover (1).
9. Install the cowl grille.

10. Install the wiper arms.
11. Connect the negative battery cable.

Sensors and Switches - Wiper and Washer Systems > < Wiper Control Module|Description and Operation|Page 5695