Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Front Door Latch: Removal and Replacement
LATCH
REMOVAL
1. Remove the door trim panel on the front door.
2. Remove the exterior door handle on the front door.
3. Remove the foil from the door.
4. Remove the rubber plug (3), remove the window channel bolts (2) and remove the window run channel (1) downward through installation opening.
5. Remove the latch cable (8) from the clip.
6. Disconnect the latch air line (9).
7. Remove the assembly screw (7) and remove the door lock module (6).
INSTALLATION