Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Front Fender Liner: Service and Repair
RF Wheelhouse Splash Shield
RF WHEELHOUSE SPLASH SHIELD
REMOVAL
1. Remove the right front tire and wheel assembly.
2. Remove the five plastic retainer nuts and the five retainer screws from the wheelhouse splash shield.
3. Remove the two retaining screws from the lower side of the rocker panel.
4. Remove the splash shield from the vehicle.
INSTALLATION
1. Install the splash shield onto the vehicle.
2. Install the two retaining screws from the lower side of the rocker panel.
3. Install the five plastic retainer nuts and the five retainer screws from the wheelhouse splash shield.
4. Install the right front tire and wheel assembly.
