Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Structural Brace: Service and Repair
REAR SUPPORT BRACKET
REMOVAL
1. Raise and support the vehicle.
2. Remove the bolts (2) from the support brace.
3. Remove the brace (1) from the vehicle.
INSTALLATION
1. Install the brace (1) to the vehicle.
2. Install the bolts (2) to the vehicle.
NOTE: Final torque must be made at curb weight.
3. Lower the vehicle.
4. Tighten the bolts to 60 N.m (44 ft.lbs.).
