Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Convertible Top Cable: Service and Repair
CABLE
REMOVAL
REMOVAL - COVER SUPPORT CABLE
NOTE: The top cover must be partially removed to gain access to the cover support cable.
1. Disconnect the negative battery cable.
2. Manually lower the convertible top (3) into the cargo compartment.
3. Secure the tonneau cover (2) in the upright position.
4. Remove the front cover retaining screws (1) and retainer (4).
5. Remove the front side weather strips (1) (right side shown, left side similar).
