Crossfire SRT-6 V6-3.2L SC VIN N (2005)
14.
Open the tonneau cover. Using two 76 mm (3 in.) wide strips of duct tape (or equivalent), secure the tonneau cover in the upright position (Fig.
11).
NOTE:
Place the duct tape so that the decklid may be opened without moving the duct tape (Fig. 11).
15.
Vacuum the debris from the top storage area and from behind the left seat.
16.
Lift the trunk separator, move it slightly rearward and let it come down and fold the trunk separator twice, into the forward most position to get
access to the decklid lid trim panel (Fig. 12).
