Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Seat Heater: Description and Operation
Heated Seats
Electrically Heated Seats are standard equipment on this model. Each seat has a separate control switch (1) and (2) located in the Center Console. Each
seat has individual heating elements, one set within the seat cushion, and the other within the seat back. The heated seat system features two heating
stages. Each control switch (1) and (2) contains 2 LED lights that indicate the heating stage the switch is in. Stage one (1 LED) is for normal heating
operation and stage two (2 LEDs) is for quick heat-up.
The Heated Seat System will operate only when the Ignition Switch is in the ACC or ON/RUN position. The Heated Seat Module receives switched
power through Fuse 1 and non-switched power through Fuse 24 in the Underhood Accessory Fuse Block. Individual illuminated Heated Seat Switches
control each seat and are designed as toggle switches that return automatically to their original position after being pressed. The switches and control
module for the heated seats are consolidated into a block with other switches to form a Switch Group. Switch illumination is provided through
instrumentation lighting. The Heated Seat Control Module controls the differing electrical power consumption requirements of the heated seats in each
heating stage and heating time.
The heated seats are switched from heating stage two to heating stage one automatically after 5 minutes and completely switched off after
