Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Measure the resistance of the Right Heated Seat Output circuit between the Heated Seat Module harness connector and the Right Heated Seat
Back/Heated Seat Cushion harness connector.
Q: Is the resistance below 5.0 ohms?
YES: Go to 3
NO: Repair the Right Heated Seat Output circuit for an open. Perform BODY VERIFICATION TEST. See: Powertrain Management/Computers
and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
3. MEASURE RIGHT HEATED SEAT GROUND CIRCUIT RESISTANCE
Measure the resistance between ground and the Right Heated Seat Ground circuit.
Q: Is the resistance below 5.0 ohms?
YES: Replace the Right Heated Seat Back/Heated Seat Cushion Element. Perform BODY VERIFICATION TEST. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification
Tests/Body Verification Test
NO: Repair the Right Heated Seat Ground circuit for an open. Perform BODY VERIFICATION TEST. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification
Tests/Body Verification Test
Both Heated Seats Inoperative
BOTH HEATED SEATS INOPERATIVE