Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Seat Heater Switch: Service and Repair
REMOVAL
WARNING: REFER TO RESTRAINTS BEFORE ATTEMPTING ANY DOOR, SEAT, STEERING WHEEL, STEERING COLUMN, OR
INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD
RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
NOTE: The Heated Seat Switches and the Heated Seat Control Module are integral and serviced together.
1. Disconnect the negative battery cable.
2. Remove the center console interior trim panel.
3. Disconnect the heated seat switch harness connectors (1).
4. Press the locking tabs inward and remove the heated seat switches from the interior trim panel.
INSTALLATION
1. Align the heated seat switch with the center console interior trim panel and press together until the locking tabs engage fully.
2. Connect the heated seat switch harness connectors.
3. Install the center console interior trim panel.
4. Connect the negative battery cable.
