Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Cowl Moulding / Trim: Service and Repair
COWL GRILLE
REMOVAL
1. Remove the windshield wiper arm plastic caps, then remove the nuts (1) and the wiper arms.
2. Remove the seven screws (2) from the cowl grille.
3. Pull back on the cowl grille to release the clips (3) and remove the hoses and connections from the underside of the cowl grille, then remove the
cowl grille from the vehicle.
INSTALLATION
1. Install the hoses and connections to the underside of the cowl grille, then install the cowl grille to the vehicle, engaging the clips on the back side
of the cowl grille.
2. Install the seven screws to the front of the cowl grille.
3. Install the windshield wiper arms, nuts and plastic caps.
