Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Brake Caliper: Service and Repair
Front
REMOVAL
FRONT DISC BRAKE CALIPER
1. Raise and support the vehicle.
2. Remove the front wheel and tire assembly.
3. Drain a small amount of fluid from the master cylinder brake reservoir with a clean suction gun.
4. Disconnect the brake pad wear indicator harness connector.
5. Remove brake pad wear indicator (1) from caliper (2) by removing the retaining bolt.
6. Bottom the caliper piston into the caliper by prying the caliper over.