Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Brake Rotor/Disc: Service and Repair
Rear Rotor - Removal and Installation
REMOVAL - REAR DISC BRAKE ROTOR
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly
3. Remove the caliper mounting bolts (1) and remove the caliper from the knuckle.
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the hose can result. Provide a suitable support to hang the
caliper securely.
4. Remove the rotor retaining bolt and remove the rotor (1) from the wheel hub.
INSTALLATION - REAR DISC BRAKE ROTOR
