Crossfire SRT-6 V6-3.2L SC VIN N (2005)
6. Install the brake pad wear indicator (2) onto the caliper. Tighten the bolt to 8 Nm (6 ft. lbs.).
7. Connect the brake wear indicator to the brake pad.
8. Install one end of the caliper support spring (2) in the top end of the caliper and under the mounting bracket (1).
9. Install the other end into the lower caliper hole (3).
10. Hold the spring (2) into the caliper hole (3) with your thumb while prying the end of the spring (2) out and down under the mounting bracket with
a screwdriver.