Crossfire SRT-6 V6-3.2L SC VIN N (2005)
CAUTION: Verify brake hose is not twisted or kinked before tightening the fitting.
11. Connect the brake hose (4) to the caliper (3).
12. Fill and bleed brake system.
^
Manual bleeding:
^
Pressure bleeding:
13. Install the wheel and tire assembly.
WARNING: DO NOT MOVE THE VEHICLE UNTIL A FIRM BRAKE PEDAL IS ACHIEVED.
14. Lower the vehicle.
15. Pump the brake pedal until the caliper pistons and the brake pads are seated and a firm brake pedal is achieved.
16. Top off the brake fluid reservoir with new fluid if necessary, and check for leaks.