Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Brake Caliper: Service and Repair
Rear
REMOVAL - REAR BRAKE CALIPER
1. Raise and support the vehicle.
2. Remove the rear tire and wheel assembly.
3. Drain a small amount of fluid from the master cylinder brake reservoir with a clean suction gun.
4. Remove caliper mounting bolts (1). Then remove the caliper from the knuckle.
CAUTION: DO NOT spill the brake fluid on any painted surfaces. Brake fluid can damage paint.
5. Remove the brake hose (1) by rotating the caliper (2) while holding the brake hose (1) with a wrench.
