Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Drive Belt: Service and Repair
DRIVE BELT
REMOVAL-SRT
1. Remove the engine cover (1). Grasp both corners of the engine cover and pull up firmly.
2. Remove the air pump tube retaining bolts (2).
3. Remove the air pump tube assembly from the engine (1).
4. Rotate the belt tensioner counterclockwise and release the tension on the accessory drive belt.
5. Remove the accessory drive belt from the pulleys.
6. Carefully release the wrench tension on the belt tensioner.