Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Engine Mount: Service and Repair
Rear Mount
REAR MOUNT
REMOVAL
1. Raise and support the vehicle.
2. Support the transmission with a transmission jack.
3. Remove the rear mount lower bolts (3).
4. Raise the transmission slightly off of the rear crossmember.
5. Remove the rear mount upper bolts (1).
6. Remove the rear mount.
INSTALLATION
1. Position the rear mount on the transmission.
2. Install the rear mount upper bolts (1). Tighten the bolts to 40 Nm (30 ft. lbs.).
3. Lower the transmission on to the rear crossmember.
4. Install the rear mount lower bolts (3). Tighten the bolts to 40 Nm (30 ft. lbs.).
5. Remove the transmission jack.
6. Lower the vehicle.
