Crossfire SRT-6 V6-3.2L SC VIN N (2005)
1. Position the idler pulley on the engine.
2. Install the idler pulley bolt (1). Tighten the idler pulley bolt to 20 Nm (15 ft. lbs.).
3. Rotate the belt tensioner counterclockwise and install the accessory drive belt over the idler pulley.
Note: If a dowel rod was inserted into the accessory drive belt tensioner, remove rod.
4. Carefully release the belt tensioner and remove the wrench.
5. Install and properly route the accessory drive belt.