Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Idler Pulley: Service and Repair
Supercharger Idler
REMOVAL - SUPERCHARGER IDLER (SRT)
1. Remove the engine cover (1). Grasp both corners of the engine cover and pull up firmly.
2. Remove the air tube assembly (1) by removing the retaining bolts (2).
3. Release the tension on the accessory drive belt.
4. Remove the supercharger idler pulley retainer bolts (1) and (2) and the pulley assembly.
INSTALLATION - SUPERCHARGER IDLER (SRT)
