Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Engine Oil Pressure: Testing and Inspection
DIAGNOSIS AND TESTING - CHECKING ENGINE OIL PRESSURE
1. Remove the oil pressure testing plug (1) at the base of the oil filter housing.
2. Install oil pressure test gauge assembly.
3. Start the engine and monitor the gauge readings.
CAUTION: If oil pressure is 0 at idle, Do Not Run engine at 3000 RPM
4. Oil pressure (engine at operating temperature): Curb Idle 34.5 kPa (5 psi) minimum 3000 RPM 300 - 724 kPa (45 - 105 psi).
5. If the oil pressure is 0 psi at idle, shut the off engine and check the pressure relief valve; it may be stuck open or have a clogged oil pickup screen.
6. Install the oil pressure test plug and tighten to 10 Nm (89 inch lbs.) after testing is completed.
