Crossfire SRT-6 V6-3.2L SC VIN N (2005)
3. Position the upper oil pan on the engine block.
4. Install the oil pan bolts with the proper size and length bolt in the correct bolt hole.
^
(1) M6 X 20
^
(2) M6 X 40
^
(3) M6 X 90
^
(4) M8 X 30
5. Tighten the M6 size bolts to 10 Nm (89 inch lbs.). Follow the tightening sequence diagram.
6. Tighten the M8 size bolts to 20 Nm (15 ft. lbs.). Follow the tightening sequence diagram.
7. Install the lower oil pan.
8. Install the clutch if equipped.
9. Install the transmission to the engine.
10. Install the engine.
