Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Oil Temperature Sensor/Switch: Service and Repair
OIL LEVEL/TEMPERATURE SENSOR
REMOVAL
1. Remove the lower oil pan.
2. Disconnect the oil level/temperature sensor harness connector (1).
3. Remove the two oil level/temperature sensor screws (1).
4. Remove the two harness retainer screws (2) and the oil level/temperature sensor.
INSTALLATION
1. Position the oil level/temperature sensor in the upper oil pan with the screws (1).
2. Position the harness retainer in the upper oil pan with the screws (2).
