Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Note: Ensure that the bolts indicated by the arrows are installed with thread sealer prior to assembly.
5. Install the timing chain cover bolts and tighten to 20 Nm (15 ft. lbs.).
6. Install the timing chain tensioner (1), tighten to 80 Nm (59 ft. lbs.).
7. Remove Special Tool 9102 Flywheel Locking Tool (1) from the engine.
8. Install the starter.
9. Install a new front crankshaft radial oil seal.
10. Install the generator.
