Crossfire SRT-6 V6-3.2L SC VIN N (2005)
12. Remove the starter.
13. Using Special Tool 9102 (1) Flywheel Locking Tool, lock the flywheel by inserting the tool into the starter opening.
14. Remove the cylinder head bolts (1) and remove the cylinder heads.
15. Remove the timing chain tensioner.
16. Remove the timing chain cover bolts as shown. Remove the timing chain cover.
INSTALLATION
Note: Ensure all sealing surfaces have been cleaned and prepared properly for effective repair. Multi-Layer Steel (MLS) gaskets require a scratch free
sealing surface.
