Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Exhaust Pipe/Muffler Hanger: Service and Repair
SUPPORT BRACKET AND ISOLATOR
REMOVAL
1. Raise and support the vehicle.
2. Remove the bracket bolt (1).
3. Remove the bracket and the isolator (2) from the exhaust hanger.
4. Remove the isolator from the bracket.
INSTALLATION
1. Position the bracket and bolt on the vehicle.
2. Tighten the bolt to 20 Nm (15 ft. lbs.).
3. Install the isolator and hanger.
4. Lower the vehicle.
