Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Air Duct: Service and Repair
Air Outlets Replacement
Side Air Nozzle
REMOVAL
NOTE: Open and close catches with a plastic wedge or a suitable coin.
1. Turn the plugs (1) 90ø to the left and remove the fuse cover (3).
2. Remove the screw located in the upper bezel of the air nozzle (2), tilt the deflector up to reveal the screw (arrow).
3. Pull the air nozzle out toward the rear.
INSTALLATION
NOTE: When installing connect the air nozzle to the air duct.
1. Install the side air nozzle to the vehicle.
2. Install the screw located in the upper bezel of the air nozzle (2), tilt the deflector up to reveal the screw hole.
3. Turn the plugs (1) 90° to the right to install the fuse cover.
Center Air Nozzle
REMOVAL