Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Condenser HVAC: Service and Repair
REMOVAL
CAUTION: Before removing the condenser, note the location of each of the radiator and condenser air seals. These seals are used to direct air through
the condenser and radiator. The air seals must be reinstalled in their proper locations in order for the air conditioning and engine cooling systems to
perform as designed.
1. Disconnect the negative battery cable.
2. Evacuate the refrigerant from the A/C system.
WARNING: OPEN THE COOLING SYSTEM ONLY WHEN THE COOLANT TEMPERATURE IS BELOW 90° C. OPEN THE CAP
SLOWLY AND REDUCE THE PRESSURE. WEAR PROTECTIVE GLOVES, PROTECTIVE CLOTHING AND PROTECTIVE
GOGGLES.
3. Relieve pressure in cooling system by turning the radiator cap on the reservoir to catch "1".
4. Remove the radiator fan.
5. Remove the coolant reservoir (1).
6. Remove the refrigerant lines (1) from the condenser.
