Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Hose/Line HVAC: Service and Repair
A/C Suction Hose/Line Replacement
REMOVAL
WARNING: REVIEW THE WARNINGS AND CAUTIONS IN THE FRONT OF THIS SECTION BEFORE PERFORMING THE
FOLLOWING OPERATION.
1. Disconnect the negative battery cable.
2. Recover the refrigerant from the refrigerant system.
3. Remove the retainer nut (1) from the expansion valve (3).
4. Slide the suction line off the stud and liquid line. Remove the lines from the clip.
5. Raise and support the vehicle.
6. Remove the A/C compressor bolts (1).
7. Remove the suction line from the compressor.
8. Remove the suction line assembly from the vehicle.
INSTALLATION