Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Oil Filter: Service and Repair
Engine Oil and Filter Change
STANDARD PROCEDURE - ENGINE OIL AND FILTER CHANGE
Change the engine oil at the mileage and time intervals described in the maintenance information of the Owners Manual.
WARNING: NEW OR USED ENGINE OIL CAN BE IRRITATING TO THE SKIN. AVOID PROLONGED OR REPEATED SKIN
CONTACT WITH ENGINE OIL. CONTAMINANTS IN USED ENGINE OIL, CAUSED BY INTERNAL COMBUSTION, CAN BE
HAZARDOUS TO YOUR HEALTH. THOROUGHLY WASH EXPOSED SKIN WITH SOAP AND WATER. DO NOT WASH SKIN
WITH GASOLINE, DIESEL FUEL, THINNER, OR SOLVENTS, HEALTH PROBLEMS CAN RESULT. DO NOT POLLUTE, DISPOSE
OF USED ENGINE OIL PROPERLY. CONTACT YOUR DEALER OR GOVERNMENT AGENCY FOR LOCATION OF COLLECTION
CENTER IN YOUR AREA.
TO CHANGE ENGINE OIL
1. Run the engine until achieving normal operating temperature.
2. Position the vehicle on a level surface and turn the engine off.
3. Remove the oil filler cap (1).
4. Raise and support the vehicle.
5. Remove the lower splash shield screws (1) and the shield.
6. Place a suitable drain pan under the crankcase drain.
