Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Fluid - A/T: Description and Operation
FLUID AND FILTER
DESCRIPTION
The oil level control is located on the electrohydraulic unit and consists of the float (5) which is integrated into the electrohydraulic control unit. The
float is positioned to plug the opening between the oil gallery and gearset chamber so that the rotating gearsets do not splash about in oil as the oil
level rises. The oil level control reduces power loss and prevents oil from being thrown out of the transmission housing at high oil temperatures.
OPERATION
With low oil levels, the lubricating oil which flows constantly out of the gearset, flows back to oil galley (2) though the opening (6). If the oil level
rises, the oil presses the float (5) against the housing opening (6). The float (5) therefore separates the oil gallery (2) from the gearset chamber (1). The
lubricating oil which continues to flow out of the gearsets is thrown against the housing wall, incorporated by the rotating parts and flows back into the
oil galley (2) through the upper opening (arrow).
