Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Fuel Injector: Service and Repair
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Remove the wiring harness cover retaining screw, and then remove the wiring harness cover (1).
4. Release the fuel pressure through the fuel rail service valve (7) using a fuel pressure tester. Collect the fuel in a suitable container.
5. Disconnect the fuel feed line (3).
6. Remove the fuel injector wire harness connector retaining clips and then disconnect the fuel injector harness (6) from the fuel injectors (4).
7. Remove the fuel rail retaining bolts (8).
8. Remove the fuel rail (2) with the fuel injectors (4) by moving the fuel rail (2) side to side while lifting upward.
9. Remove the fuel injector retaining clips and the fuel injectors (4) from the fuel rail (2).
INSTALLATION
