Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Fuel Gauge Sender: Testing and Inspection
The Fuel Level Sending Unit (1) contains a variable resistor (3) (track). As the float (2) moves up or down, electrical resistance will change. Refer to
testing. To test the gauge sending unit only, it must be removed from vehicle. The sending unit is a part of the Fuel Level Sending Unit/Sensor, located
and accessible at the top of the Fuel Tank. Measure the resistance across the sending unit terminals. With float (2) in up position, resistance should be 20
ohms ± (5%). With float (2) in down position, resistance should be 270 ohms ± (5%).
